A time-of-use plan charges a different price for electricity depending on the hour or the day, such as free nights or cheap weekends. For a solar home, the right one depends on when your panels produce, when you use power, and whether you have a battery to move energy between the two.
What a time-of-use plan actually is
In most of Texas you pick a retail electric provider, and each one designs its own plans. The Public Utility Commission describes time-of-use plans as plans that give you incentives to use power at certain times, like nights or weekends, with a per-kWh charge that changes with the time of day or the day of the week.
That covers several shapes: free nights, free weekends, peak and off-peak pricing, and plans with three price windows. There is no single Texas schedule. Each provider sets its own hours, and they are spelled out in the plan's Electricity Facts Label, or EFL.
The trade is simple. The cheap or free hours are paid for somewhere else, usually with a higher price during the hours you are not shielded. Whether you come out ahead depends on how much of your use lands in the cheap window.
The EFL average price is an estimate, not your price
Every Texas plan shows an average price per kWh on its EFL and on Power to Choose. For a time-of-use plan, the PUC notes that this average price is based on the provider's estimate of how much power a typical customer uses in the free or discounted hours versus the rest of the day.
That estimate is not your home. A solar home already covers much of its daytime use with its own panels, so the power it buys from the grid is mostly evening and night power. Depending on the plan's windows, that can make the plan look better or much worse for you than the label suggests.
So skip the headline number. Find the price per kWh for each window in the EFL, then run your own usage through it, hour by hour, as shown below.
Why Texas prices care about 6 p.m.
Time-of-use pricing follows the grid's stress. On July 22, 2026, ERCOT set a record hourly peak of 91.1 GW at 6:00 p.m., about 6 percent above the 2023 record, according to EIA figures reported by the American Public Power Association. Solar supplied 32 percent of the power at that hour.
For solar owners, that early-evening hour is when home panels are fading and the AC is still working hard. Your solar is strongest around midday, when power is plentiful. A plan that only rewards you for midday use helps your panels less than one that makes evenings or nights cheap.
How each plan type fits a solar home
- Free nights, no battery: Your panels cover daytime, the plan covers night. The risk is the gap between sunset and the start of the free window, which is often your most expensive stretch. Check what you use in those hours.
- Free nights, with a battery: The battery covers the evening gap and the free window covers the rest of the night. This is often the cleanest fit, as long as the battery is set up to discharge in the paid hours.
- Peak and off-peak pricing: Works best with a battery that charges from solar during cheap hours and runs the house during the peak window. Without storage, you mostly feel the higher peak price.
- Free weekends: Only pays if your big loads, like laundry, pool pump, or EV charging, can really move to Saturday and Sunday. If they cannot, you pay higher weekday prices for nothing.
- Plans that pay for exports: Many time-of-use plans do not credit the power your panels send to the grid. If you export a lot at midday and have no battery, compare against a buyback plan first.
How to test a time-of-use plan against your own usage
- Get your interval data. Your smart meter records use in short intervals. Download a few summer and winter months from your provider's portal or Smart Meter Texas, so you see grid use by hour, not just a monthly total.
- Split it by window. Using the EFL's hours, add up the kWh you bought in each window: free, discounted, and paid. Do the same for a hot month and a mild one.
- Price each window. Multiply each window's kWh by its price on the EFL, then add the base charge and the delivery charges the EFL lists. That is your real bill on that plan.
- Compare with your current plan. Run the same months through your current plan's EFL. Compare total dollars, not average cents per kWh.
- Check what happens to exports. Look for a solar buyback or export credit line on the EFL. If there is none, count the kWh you send to the grid as worth zero on that plan.
- Check the contract terms. Note the contract length and the early termination fee before switching. A plan that only wins in summer may not be worth a 12-month lock-in.
A battery only helps if its schedule matches your plan
A battery does not know your rate plan unless you tell it. In the Tesla app, you enter your utility rate plan and then select Savings under Operational Mode, as Tesla's Savings mode guide describes. In that mode, the Powerwall charges from solar during cheap hours and discharges to cover the home during peak hours.
The same guide notes the mode may not behave as expected for the first seven days while it learns your use. So check it after a week, not the morning after you switch plans. Enphase has comparable profiles; a solar financing company's help center lists the Enphase Savings profile as the time-of-use mode.
The most common mistake is changing plans and leaving the old schedule in the app. The battery then empties during free hours and the house buys power in the expensive ones. Our guide to reading your solar monitoring app shows where to confirm when the battery charges and discharges.
What to check today
- Pull up your current EFL and write down every price window and its hours.
- Download one hot month of interval data and see how much grid power you buy between 5 p.m. and 9 p.m.
- Check whether your current plan credits solar exports, and at what rate on the EFL.
- If you have a battery, open the app and confirm the rate plan and mode match the plan you are actually on.
- Note your contract end date. Shopping a time-of-use plan right before it ends avoids an early termination fee.
- If your system is producing less than it used to, fix that first. Our post on why a solar bill is still high in Texas covers the usual causes.
When the plan is not the problem
Sometimes no plan fixes the bill, because the system itself is the issue: a failed inverter, a battery that was never configured, or panels that were reinstalled wrong after a roof job. If your buyback credit shrank, our post on solar buyback rates dropping in Texas and the best alternative to solar buyback explain the options.
If evening use is what hurts, storage is usually the lever. Our batteries and energy storage team can look at your interval data, your panels, and your current plan, and tell you whether a battery, a settings change, or a different plan makes the most sense. If you are still deciding on panels, start with solar installation.
Frequently Asked Questions
They are worth it when most of the power you buy from the grid falls in the cheap or free window. For solar homes, that is often true at night and less true in the early evening. Run your own interval data through the plan's EFL before you switch, and compare total dollars, not the average price.
It can be, because your panels cover the day and the plan covers the night. The weak spot is the stretch between sunset and the start of the free window. A battery set to cover those hours usually makes the pairing work. Also check whether the plan credits your exports.
Many do not. Free nights and similar plans usually make some hours cheap or free but do not credit what your panels send to the grid. Look for a buyback or export credit line on the Electricity Facts Label, and if there is none, treat exported power as worth nothing on that plan.
Each provider sets its own peak hours on its plan's EFL, so read yours. On the grid side, summer stress tends to land in the late afternoon and early evening, when air conditioning is still running and solar output is falling.



