Solar Basics

How Many Solar Panels Do I Need in Texas? A Simple Way to Size It From Your Own Bills

The Light Group USA · · 8 min read

The number of panels you need comes from three things: how much electricity your home uses in a year, how much sun your roof gets, and the wattage of each panel. A typical Texas home lands somewhere in the low-to-mid 20s, but your bills, not an average, should decide your number.

The short answer, and why averages mislead

Texas homes use a lot of electricity. In the U.S. Energy Information Administration's 2023 residential bill table, the average Texas residential customer used about 1,146 kWh per month. That is the number most online answers start from.

The problem is that nobody's home is average. A 1,600 sq ft house with a gas water heater and a 3,200 sq ft house with a pool pump and two electric vehicles can differ by thousands of kWh a year. Size from an average and you can end up with a system that is too small to matter or too big for your roof.

The Department of Energy's guidance on planning a home solar system starts in the same place we do: review your electricity bills to find your annual electricity needs. Everything below builds on that.

The 3-step formula to estimate your panel count

  1. Add up 12 months of usage. Find the kWh line on each bill, or download 12 months of usage from your retail electricity provider's account page. Add them up. One summer bill alone will overstate your needs and one spring bill will understate them.
  2. Convert usage into system size. University of Illinois Extension's homeowner's guide gives a simple formula: divide your annual kWh by (peak sun hours x 365 x 0.80). The 0.80 accounts for real-world losses. The result is the system size in kW.
  3. Divide by panel wattage. Multiply the kW by 1,000 to get watts, then divide by the wattage of the panel you plan to use. Round up. That is your panel count before roof limits.

Schedule My Assessment

A worked example for a Texas home

This is an example, not a quote. Say a home uses the Texas average from the EIA table: about 1,146 kWh a month, or roughly 13,750 kWh a year.

Now say the roof gets 5 peak sun hours a day. That is an assumption for the math, and your real number depends on location, tilt, direction and shade. Plugging it into the Illinois Extension formula: 5 x 365 x 0.80 = 1,460 kWh per kW per year. Then 13,750 divided by 1,460 is about 9.4 kW.

With 400-watt panels, which EnergySage describes as the residential standard, 9,400 watts divided by 400 is 23.5, so 24 panels. With 430-watt panels it drops to 22.

Change the sun assumption and the answer moves. At 5.5 peak sun hours, the same home needs about 8.6 kW, or 22 panels at 400 watts. That is why the sun number for your exact address matters more than any rule of thumb.

Get the sun number for your own roof

You do not have to guess peak sun hours. NREL's free PVWatts calculator estimates the yearly output of a grid-connected system at your address. Enter a 1 kW system, set your roof's direction and tilt, and the annual kWh result is your kWh per kW.

Divide your yearly usage by that number and you have your system size in kW, already adjusted for your location. It is a planning tool, not a guarantee, but it is far better than a national chart.

For context, Berkeley Lab's 2026 distributed solar data update reports a median U.S. residential system size of 7.7 kW in 2025. A Texas home with a big cooling load can land above that, and that is fine.

What changes the number in Texas

  • Summer cooling: Air conditioning drives Texas bills. If your AC is old, upgrading it or sealing ducts first can shrink the system you need. Our energy efficiency work starts there.
  • Plans to add load: An EV, a pool, a home office or converting gas appliances to electric adds usage. Size for the next five years, not last year.
  • Roof space and shade: Trees, dormers, vents and setback rules limit how many panels fit. A smaller, well-placed array can beat a bigger one on a shaded face.
  • How your plan pays for exports: If your retail plan pays little for energy you send to the grid, covering every kWh you use may not pay off. Read our guide on Texas buyback rates before you pick a target.
  • Your roof's age: Panels last decades. If the roof needs replacing soon, do it before the install, or plan for removal and reinstallation later.

Should solar cover all of your usage?

Not always. Covering all of your annual usage sounds tidy, but in Texas the value of each extra kWh depends on your retail plan. Energy you use at home replaces power you would have bought. Energy you export is worth whatever your plan pays for it, and that can be much less.

One common approach is to size for daytime use plus part of the evening, then add storage. A home battery stores midday solar for the evening peak and for outages, which can make a slightly smaller array work harder. Our guide on adding a battery to an existing system walks through that choice.

If you are on a time-of-use plan, the timing of your usage matters as much as the total. See how time-of-use plans in Texas change the math.

Checklist to do today before you talk to any installer

  • Download 12 months of kWh usage, not just your last bill.
  • Note any big changes coming: EV, pool, new AC, home addition.
  • Run your address in PVWatts with a 1 kW system and write down the yearly kWh.
  • Do the math: yearly usage divided by that number, times 1,000, divided by panel wattage.
  • Check your roof's age and any shade from trees or nearby buildings.
  • Ask every installer what usage and sun numbers they used. If they cannot show you, their panel count is a guess.
  • If you already have solar and the bill is still high, read why your solar bill is still high before adding panels.

Already have panels, or starting fresh: where a site visit helps

Some homeowners run this math years after their system went up and find a gap. Usage grew, the plan that paid for exports changed, or the system simply makes less than it did. Before adding panels, find out which one it is.

Compare a recent year of production in your monitoring app with the first full year. Panels lose a little output every year, and our guide to normal degradation shows how small that loss should be. A big drop usually points to a fault, shade or a failed inverter, not aging.

If production is healthy and usage went up, then extra panels or a battery may be the fix. If production fell, repairing what you have comes first, and adding panels to a system with a problem only hides it.

The formula gets you close. A site visit settles the details a calculator cannot see: the real usable roof area, shading through the seasons, the condition of the roof deck, and whether your electrical panel can take the system without an upgrade.

Our licensed and insured team handles solar installation, batteries, roofing and HVAC as one project, so the system can be sized around the roof and the AC you will actually have. Homeowners in the metro areas can start from our Houston or Dallas pages, or call (844) 440-7322.

Schedule My Assessment

Frequently Asked Questions

It depends on your yearly usage and your roof. As an example, a home using the Texas average of about 1,146 kWh a month from the EIA table, with an assumed 5 peak sun hours a day, would need about 24 panels of 400 watts. Your own bills and address can move that number up or down.

Roughly the panel wattage times your peak sun hours, minus losses. Using the 0.80 loss factor from the Illinois Extension formula, a 400-watt panel at an assumed 5 peak sun hours makes about 1.6 kWh a day. Shade, heat and roof direction change that.

That is about 24,000 kWh a year. Divide it by the yearly kWh per kW that PVWatts gives for your roof. At an assumed 1,460 kWh per kW, that is about 16.4 kW, or 42 panels at 400 watts. Check whether your roof has room before planning around that number.

Often yes, but it depends on your inverter, your electrical panel and your roof space. Mixing new panels with older ones needs a proper design so the new array does not drag down the old one. A technician should check the existing system first.

Sources

Continue Reading

Up next

Ready to power your home or business?

Get a free consultation with The Light Group USA — America's #1 Choice for Energy Independence.

By submitting or calling, you consent to receive calls and SMS from The Light Group USA at the number provided, including via auto-dialer or pre-recorded messages. Consent is not required for purchase. Msg/data rates may apply. Reply STOP to opt out. See our Privacy Policy.