How long does it take?

Most removal and reinstallation timelines depend on your roofing schedule, but we coordinate everything to keep the process as fast and smooth as possible.

What happens after removal?

Your panels are safely stored until your roof work is completed, then we reinstall and test your system.

Will my roof be damaged?

No. Our process is designed to protect your roof and prevent leaks, and all work is handled by trained professionals.

Can I remove panels myself?

We strongly recommend against it. Improper removal can cause damage to both your roof and your solar system.

Do you work with insurance?

Yes. We help guide you through the insurance process and provide the documentation needed.

Can I upgrade my system during reinstall?

In many cases, yes. We can evaluate upgrade options when reinstalling your system.

Solar Panel Removal & Reinstallation in Groveland, FL

America’s #1 Choice for Energy Independence

We handle removal, storage, and reinstallation — coordinating with your roofer so your project runs smoothly from start to finish.

Get Free Quote (844) 440-7322

By submitting or calling, you consent to receive calls and SMS from The Light Group USA at the number provided, including via auto-dialer or pre-recorded messages. Consent is not required for purchase. Msg/data rates may apply. Reply STOP to opt out. See our Privacy Policy.

Get Started

Protect your roof and your solar investment

Let professionals handle your solar panel removal the right way.

Get Free Quote Call Now

Removal & Reinstall

Panel removal and reinstall in Groveland

Groveland is one of the few Florida cities that says it out loud: the city is served by two electric providers, with separate forms for Duke Energy Florida and for SECO Energy. Which one you have is decided by your address, not by preference. For a solar removal that is not trivia. Duke is an investor-owned utility crediting exports at the retail rate one to one, and SECO is a cooperative that writes its own interconnection and credit rules.

So the first question on any Groveland job is which side of that line the house sits on. We read it from the meter and the most recent bill. If it turns out to be a cooperative account, the reconnection follows the co-op's own process and timeline, and that can change how the reinstallation date gets set, especially when the array is coming back in a different arrangement than the one already on file.

Groveland is deep inland, out past the lakes, and nothing about how arrays fail here involves salt. It is heat and grit. Sand and pollen pack into rail channels and clamp threads, clamps loosen through years of thermal cycling, and modules spend July running far above their rated test temperature. A roof tear-off is the only realistic moment to clean all of it out and reset torque across the entire array.

The work is scheduled, start to finish. Removal happens on a set date ahead of the roofer, storage is arranged for however long the deck takes, and the array goes back onto a finished roof with new flashing and new penetrations landing in structure. We cover Groveland from Orlando and Tampa. A planned window beats a crew improvising around a tarp, and near Lake David Park there is no reason it should ever be the second one.

What We Check

On a Groveland removal we get these right

Which provider, Duke or SECOThe city states it plainly: Groveland is served by two electric providers, with separate forms for Duke Energy Florida and SECO Energy. The address decides which. We read it from the meter and the current bill, because the reconnection process and the credit rules are not the same on both sides of that line.

Cooperative rules are their ownDuke is investor-owned and credits exports at the retail rate, one to one. SECO Energy is a cooperative and sets its own interconnection requirements and credit terms. On a co-op account the reinstallation timeline can depend on their process, which is a reason to open the paperwork before the roofer starts.

Heat and grit, not saltGroveland sits well inland, so corrosion is not the driver. Sand and pollen pack into rail channels and clamp threads, and modules run far above their rating through the summer. Both cost output with no error code attached. With the array down, the roof and the racking can finally be cleared properly.

Same layout, or a declared changeNew roof planes, vents or a repaired section sometimes force a different module arrangement. That is workable, but it changes the as-built and possibly the string configuration. It becomes a conversation with the utility before reconnection rather than a surprise for the inspector standing in the driveway.

Flashing under the course aboveEvery mount on the new roof is a new penetration. The flashing goes beneath the shingle course above it so water runs over the top of the flashing rather than into a bead of sealant. Sealant is a supplement to a proper flashing detail and never a replacement for one.

Permitting in Lake CountyRemoval and reinstallation generally require a permit in Florida, and the issuing authority depends on whether the address is inside the City of Groveland or in unincorporated Lake County. That is confirmed at quoting, along with whether an electrical re-inspection is needed once the system is reconnected.

FAQ

Solar service in Groveland — common questions

Is Groveland served by Duke Energy or SECO Energy?

Both, depending on the address. The city says it directly, that Groveland is served by two electric providers, and it maintains separate forms for Duke Energy Florida and for SECO Energy. Florida is a regulated market, so the provider comes with the location rather than being chosen. The meter and the most recent bill settle the question.

Does a cooperative handle solar credits the same way Duke does?

No. Duke Energy Florida is investor-owned and credits exported energy at the retail rate, one to one. SECO Energy is a cooperative and writes its own interconnection requirements and credit rules. Which set applies to a reinstalled system depends entirely on which provider serves that address, so it is checked before the array comes down.

Will I have to re-apply for interconnection after the reinstall?

If the same modules go back in the same configuration with the same inverter, the existing arrangement generally continues. If anything material changes, such as module count, inverter model or layout, the utility needs that before reconnection. On a cooperative account the process and timing belong to the co-op, which is why it gets started early.

How long can the panels stay in storage?

As long as the roof takes, provided they are stored properly: flat, never on the glass, with separators between them, dry and out of the work area. Re-roofs run long for ordinary reasons, weather and inspection scheduling among them. The storage arrangement is agreed before removal day rather than improvised on it.

Will my array go back in exactly the same place?

That is the default, and it keeps both the paperwork and the production estimate simple. Occasionally the new roof introduces a vent, a change in plane or a repaired section that makes an identical layout impractical. When that happens it gets raised before reinstallation begins, not discovered at the electrical inspection.

Also in Groveland

Other solar work we do here

Repair & maintenanceDiagnostics, inverter faults, monitoring and post-storm checks.New installationSizing, interconnection and permitting for a new system.

Florida Service Areas

Panel Removal & Reinstallation near Groveland

Crews based in Orlando and Tampa, covering 207 cities statewide.

We also cover Florida Panhandle, North Florida, Northeast Florida, Space Coast, Tampa Bay, Southwest Florida, Treasure Coast, South Florida — see every Florida city we service.