How long does it take?

Most removal and reinstallation timelines depend on your roofing schedule, but we coordinate everything to keep the process as fast and smooth as possible.

What happens after removal?

Your panels are safely stored until your roof work is completed, then we reinstall and test your system.

Will my roof be damaged?

No. Our process is designed to protect your roof and prevent leaks, and all work is handled by trained professionals.

Can I remove panels myself?

We strongly recommend against it. Improper removal can cause damage to both your roof and your solar system.

Do you work with insurance?

Yes. We help guide you through the insurance process and provide the documentation needed.

Can I upgrade my system during reinstall?

In many cases, yes. We can evaluate upgrade options when reinstalling your system.

Solar Panel Removal & Reinstallation in Mount Dora, FL

America’s #1 Choice for Energy Independence

We handle removal, storage, and reinstallation — coordinating with your roofer so your project runs smoothly from start to finish.

Get Free Quote (844) 440-7322

By submitting or calling, you consent to receive calls and SMS from The Light Group USA at the number provided, including via auto-dialer or pre-recorded messages. Consent is not required for purchase. Msg/data rates may apply. Reply STOP to opt out. See our Privacy Policy.

Get Started

Protect your roof and your solar investment

Let professionals handle your solar panel removal the right way.

Get Free Quote Call Now

Removal & Reinstall

Panel removal and reinstall in Mount Dora

In Mount Dora the first question is not about the roof, it is about which utility is on the pole. The city operates its own electric utility serving roughly 6,100 customers and publishes an official service boundary map, while SECO Energy and Duke Energy Florida serve other parts of the same city. Two neighbors on the same street can be answering to different rulebooks entirely.

That matters more on a reinstall than people expect. Investor-owned utilities such as Duke credit exported energy at the retail rate. A municipal utility sets its own interconnection process and its own credit terms, and reconnecting a system after roof work can mean going back through that process. The provider is read off the meter and the bill, and then that utility's rules are the ones followed.

Around Donnelly Street and the blocks above Lake Dora the housing is old, and old roofs are rarely simple: steep pitches, multiple planes, dormers, and standing seam or ribbed metal on some of them. Metal changes the reinstall completely, because the attachment depends on the seam or the rib rather than a lag into a rafter. That decision belongs to the planning stage, not to removal day.

Seventy kilometers from the coast, salt is not the enemy here. Heat, oak pollen and the shade of a mature tree canopy are. Losses from soiling and shading never announce themselves with an error code, they just show up on the bill as a system that never quite performs like it used to. With the array down, measuring what each string actually produces is a small addition to the job.

What We Check

On a Mount Dora removal we get these right

Identify the utility before anything elseMount Dora Electric, SECO Energy and Duke Energy Florida all serve parts of this city, and the city publishes an official boundary map for exactly that reason. The provider gets confirmed from the meter and the bill, because everything downstream, from credit terms to reconnection paperwork, depends on that answer.

Municipal rules are not utility rules in generalA city-run utility sets its own interconnection requirements, its own forms and its own credit structure for exported energy. Assuming a Duke process on a municipal account is how a reinstalled system sits finished and unenergized for weeks. The correct process is confirmed with the actual provider first.

An attachment plan matched to the roof typeMetal, tile, shingle and low-slope each require a different attachment and a different flashing detail. On standing seam, clamps to the seam can avoid penetrations altogether. That method is decided and specified before removal, since it determines what hardware has to be on the truck for the return visit.

City of Mount Dora or Lake CountyThe permit follows the address, and inside a city with a boundary this irregular that is worth verifying rather than assuming. The submittal, the inspection scheduling and the reinspection before re-energizing all belong to whichever authority actually has jurisdiction over the property.

Test the strings while the array is accessibleWith modules off the roof, open circuit voltage and insulation resistance can be checked per string, and hot spots or delamination are visible on the back of the laminate. A panel that has been quietly underperforming for years is far cheaper to identify now than after it goes back up.

Storage and handling on a steep, complex roofSteep pitches and multiple planes mean more lifting and more handling, and handling is where microcracks start. Modules come down in a controlled sequence, are carried on the short frame by two people, and are stored upright with separators until the roof is complete and dry.

FAQ

Solar service in Mount Dora — common questions

How do I know whether I am served by Mount Dora Electric, SECO or Duke?

The bill and the meter say so, and the city publishes an official electric utility service boundary map because the territory genuinely is divided. Mount Dora's own utility serves roughly 6,100 customers and buys wholesale power from Duke, while SECO Energy and Duke serve other parts of the city directly. Address decides it, not the city name.

Does a municipal utility have to approve the reinstallation?

A municipal utility sets its own interconnection and credit rules, so the answer comes from that utility rather than from a statewide rule. An unchanged system going back on the same roof is the simplest case. Any change in module count, inverter or system size is what usually triggers a fresh review on the utility side.

I have a metal roof. Can panels be reinstalled without drilling new holes?

On standing seam, frequently yes, because clamps grip the seam and carry the array without penetrating the panel. On exposed-fastener or ribbed metal, attachments generally go through the roof at the rib with a gasketed fastener and sealant detail. Which applies depends on the profile, and that is confirmed before the array comes off.

Is a permit required for removal and reinstallation here?

In Florida this work generally requires a permit, because the roof is re-penetrated and the electrical system is disconnected and reconnected. Whether it is filed with the City of Mount Dora or with Lake County depends on the address. An inspection follows the reinstall, and the system stays off until it clears.

Will my production change after the system goes back up?

It should return to what it was, and sometimes it improves. Panels get cleaned, connectors are re-seated properly, failing hardware is replaced and strings can be tested individually while the array is accessible. If output was already down from soiling or a bad connection, this is the point where the cause becomes visible.

Also in Mount Dora

Other solar work we do here

Repair & maintenanceDiagnostics, inverter faults, monitoring and post-storm checks.New installationSizing, interconnection and permitting for a new system.

Florida Service Areas

Panel Removal & Reinstallation near Mount Dora

Crews based in Orlando and Tampa, covering 207 cities statewide.

We also cover Florida Panhandle, North Florida, Northeast Florida, Space Coast, Tampa Bay, Southwest Florida, Treasure Coast, South Florida — see every Florida city we service.