How long does it take?

Most removal and reinstallation timelines depend on your roofing schedule, but we coordinate everything to keep the process as fast and smooth as possible.

What happens after removal?

Your panels are safely stored until your roof work is completed, then we reinstall and test your system.

Will my roof be damaged?

No. Our process is designed to protect your roof and prevent leaks, and all work is handled by trained professionals.

Can I remove panels myself?

We strongly recommend against it. Improper removal can cause damage to both your roof and your solar system.

Do you work with insurance?

Yes. We help guide you through the insurance process and provide the documentation needed.

Can I upgrade my system during reinstall?

In many cases, yes. We can evaluate upgrade options when reinstalling your system.

Solar Panel Removal & Reinstallation in Apopka, FL

America’s #1 Choice for Energy Independence

We handle removal, storage, and reinstallation — coordinating with your roofer so your project runs smoothly from start to finish.

Get Free Quote (844) 440-7322

By submitting or calling, you consent to receive calls and SMS from The Light Group USA at the number provided, including via auto-dialer or pre-recorded messages. Consent is not required for purchase. Msg/data rates may apply. Reply STOP to opt out. See our Privacy Policy.

Get Started

Protect your roof and your solar investment

Let professionals handle your solar panel removal the right way.

Get Free Quote Call Now

Removal & Reinstall

Panel removal and reinstall in Apopka

Most solar removals in Apopka begin with a roofer, not with the solar. A shingle roof in Orange County reaches the end of its life while the array bolted to it is barely a third of the way through its warranty, and two trades suddenly have to share one deck. The roofing company will not touch the modules. The company that installed them may no longer answer the phone. That gap is the work.

Apopka sits roughly forty miles inland, so salt is not the enemy here. Heat, dust and pollen are. Panels that have baked on a west-facing plane above the SR 429 corridor come down dirtier and more brittle than owners expect, and the racking feet usually hide sealant that dried out years ago. A teardown is the only time anyone sees the underside of an array, which makes it the right moment to catalog what should not go back up unchanged.

Duke Energy Florida serves the city under a franchise agreement, so the utility is set by the address rather than chosen. Duke credits exported energy at the retail rate, and the interconnection agreement on file describes the system as it was approved. Putting the same modules back in the same count and layout keeps that agreement intact, which is precisely why the module map, serial numbers and inverter configuration get documented before the first clamp is loosened.

This is scheduled work, never an emergency, and that suits how we cover Apopka from Orlando with a real date instead of a maybe. Depending on where the parcel falls, the permit comes from the city or from Orange County, and the reinspection follows the same route. We sequence around the roofer so the deck is never left open overnight, then hand back photos, torque values and a wiring diagram.

What We Check

On a Apopka removal we get these right

Where the panels go while the roof is openA reroof in Apopka can run several days, longer if the deck needs repair. Modules leave the roof onto padded racks, stood upright with separators rather than laid face down on a driveway, and labeled by row and string so the array goes back exactly as it came off.

New penetrations land in the raftersThe reinstall rarely reuses the old holes, because the roof under them is new. Every lag has to hit structure, not sheathing. We locate rafters before drilling, seat each standoff in sealant beneath its flashing, and keep a record of where the fasteners landed for the reinspection.

Duke interconnection stays as approvedDuke Energy Florida approved a specific module count, layout and inverter. Keeping those three unchanged means the existing agreement still describes the system accurately. If something has to change, such as a failed module or a different roof plane, that is a conversation with the utility, not a quiet substitution.

City or county permit, decided by the addressRemoval and reinstallation generally needs a permit in Florida, and Apopka's ZIP codes cover both city limits and unincorporated Orange County. We confirm which authority the parcel answers to before scheduling, so the reinspection is booked with the office that can actually sign it off.

Heat, dust and pollen come off with the arrayInland systems lose output slowly and silently: baked-on pollen, dust film, and heat derate on a tight roof gap. With the modules down, glass gets cleaned properly, and any panel with a burned bypass diode or a scorched junction box is caught before it goes back up.

Recommissioned, not just reconnectedBolting the array back is half the job. Strings get read against their expected voltage, the inverter comes back online with its monitoring restored, and production is checked against a clear-sky day before we leave, so a miswired string does not hide for a season.

FAQ

Solar service in Apopka — common questions

Do I have to remove my solar panels to replace my roof in Apopka?

Yes, in almost every case. Roofers cannot install new underlayment or shingles beneath a mounted array, and most will not accept liability for a roof they could not fully access. The array comes off in labeled rows, the roof is replaced, then the system is reinstalled on new penetrations that land in the rafters.

Who issues the permit, the City of Apopka or Orange County?

It depends on the parcel. The 32712 and 32703 ZIP codes include both incorporated city addresses and unincorporated Orange County. We confirm the jurisdiction from the address before pulling anything, because the permit and the later reinspection have to go through the same building department.

Does Duke Energy have to re-approve the system afterward?

Not if the system comes back exactly as approved. Duke Energy Florida's interconnection agreement describes a specific module count, layout and inverter, and reinstalling the same equipment in the same configuration leaves that description accurate. Any change, such as a replaced module or added capacity, has to be reported rather than assumed.

How long will my panels be off the roof?

As long as the roof takes, which is usually days and occasionally weeks if the deck needs repair or the weather turns. The modules are stored upright on padded, separated racks, not stacked on their glass, and they stay labeled by row and string the whole time so the rebuild is a reversal, not a guess.

Will my system produce the same after reinstallation?

It should, and we verify rather than assume. Each string is read against expected voltage and current, monitoring is brought back online, and output is compared to a clear-sky baseline before the job closes. Panels also come back cleaner than they went up, since the glass is washed while the array is down.

Also in Apopka

Other solar work we do here

Repair & maintenanceDiagnostics, inverter faults, monitoring and post-storm checks.New installationSizing, interconnection and permitting for a new system.

Florida Service Areas

Panel Removal & Reinstallation near Apopka

Crews based in Orlando and Tampa, covering 207 cities statewide.

We also cover Florida Panhandle, North Florida, Northeast Florida, Space Coast, Tampa Bay, Southwest Florida, Treasure Coast, South Florida — see every Florida city we service.