How long does it take?

Most removal and reinstallation timelines depend on your roofing schedule, but we coordinate everything to keep the process as fast and smooth as possible.

What happens after removal?

Your panels are safely stored until your roof work is completed, then we reinstall and test your system.

Will my roof be damaged?

No. Our process is designed to protect your roof and prevent leaks, and all work is handled by trained professionals.

Can I remove panels myself?

We strongly recommend against it. Improper removal can cause damage to both your roof and your solar system.

Do you work with insurance?

Yes. We help guide you through the insurance process and provide the documentation needed.

Can I upgrade my system during reinstall?

In many cases, yes. We can evaluate upgrade options when reinstalling your system.

Solar Panel Removal & Reinstallation in Greenacres, FL

America’s #1 Choice for Energy Independence

We handle removal, storage, and reinstallation — coordinating with your roofer so your project runs smoothly from start to finish.

Get Free Quote (844) 440-7322

By submitting or calling, you consent to receive calls and SMS from The Light Group USA at the number provided, including via auto-dialer or pre-recorded messages. Consent is not required for purchase. Msg/data rates may apply. Reply STOP to opt out. See our Privacy Policy.

Get Started

Protect your roof and your solar investment

Let professionals handle your solar panel removal the right way.

Get Free Quote Call Now

Removal & Reinstall

Panel removal and reinstall in Greenacres

Greenacres is an incorporated city rather than a county pocket, strung along Lake Worth Road as that corridor runs west from the coast through Palm Beach County. About 44,736 residents live across 33463, 33413, 33415 and 33467, in a housing stock dominated by single-family homes and low-rise communities. Roof replacements move through those neighborhoods in waves, and every array bolted to one of those roofs has to come off first.

The city limits decide the paperwork. An address inside Greenacres pulls its removal and reinstallation permit from the city, while neighbors a short drive away in unincorporated Palm Beach County file with the county instead. It reads like a technicality until the roof is open and the reinspection is booked with the wrong office. Jurisdiction gets confirmed by street address before a single date is promised to anyone.

The job itself starts with a phone call about a roof, not about solar. The roofing contractor sets a tear-off, then explains his crew will not touch the modules or the conduit. The original solar company frequently cannot be reached, and no one has the string layout or the torque spec. What is really being bought at that point is coordination: two trades, one roof, one clear order of work.

Florida Power and Light serves Greenacres and credits exported power at the retail rate, so the account arrangement survives the project untouched. The array does not, unless the reinstallation is treated as its own piece of work with its own inspection. This is scheduled work rather than an emergency, which makes it a comfortable fit for a booked window covered from Orlando and Tampa.

What We Check

On a Greenacres removal we get these right

City of Greenacres, not Palm Beach CountyInside city limits the permit and the reinspection run through the city building department. Addresses in unincorporated pockets nearby go to the county. Filing with the wrong office does not usually cost money, it costs days, and those days are spent with a new roof waiting to be closed out.

Check the community rules before the roofer startsMany neighborhoods along this corridor are deed restricted, and where an architectural committee exists it may want to see the reinstallation layout, not just the new shingle color. Asking that question early is cheap. Discovering it after the array is back up rarely is.

Write down who owns the flashingRoofer or solar crew, someone has to be named for every penetration. New mounts, sealant at the deck and flashing tucked under the course above are the boundary where responsibility usually blurs. Put the split in writing before either trade starts, so a stain on the ceiling has an owner.

Torque values, not hand feelModule clamps and lag bolts have published torque figures from the racking manufacturer. Under-torqued clamps let modules creep in wind uplift; over-torqued ones deform the frame. A reinstallation that skips a torque wrench looks identical from the ground and behaves differently in the first serious storm.

Handle modules like glass, because they arePanels are carried by the short rails, never lifted by one long edge, never rested face down and never stacked without separators. Microcracks born during a removal do not trip an alarm. They surface as a string that quietly underproduces for the rest of the system life.

Log the offline dates for the utility billThe FPL account and its retail rate credit continue unchanged, but the system exports nothing while it is stored. Recording the exact days the array was down gives the next two bills an explanation and creates a clean before and after comparison once production resumes.

FAQ

Solar service in Greenacres — common questions

Do I pull the permit through Greenacres or through Palm Beach County?

Through the City of Greenacres when the address sits inside city limits, which most 33463 and 33467 addresses labeled Greenacres do. Unincorporated parcels nearby file with Palm Beach County instead. Because mailing addresses and municipal boundaries do not match perfectly in this part of the county, the jurisdiction is verified by address first.

Who is responsible if the roof leaks around a solar mount afterward?

Whoever made the penetration, which is why the split is agreed before work starts. The roof warranty covers the roofing system, the solar work covers the mounts and flashing installed with the array. When both trades are coordinated under one schedule and documented, a leak has a clear owner instead of two companies pointing at each other.

Can the array be reinstalled in a different layout on the new roof?

Sometimes, and it is worth asking while everything is down. Moving modules changes string lengths, shading behavior and sometimes the interconnection paperwork, so it is a design decision rather than a field improvisation. If the original layout was shaded or awkward, the reroof is the cheapest moment in the system life to fix it.

Does FPL have to re-approve the system after it goes back up?

The existing interconnection agreement stays with the address when the system returns unchanged, and FPL continues crediting exports at the retail rate. What does get closed out is the local electrical reinspection tied to the permit. If capacity or equipment changes during the project, that is a separate conversation with the utility.

What paperwork should I have when the job is finished?

A closed permit with the passed reinspection, an as-built showing string layout and any replaced hardware, the module and inverter model numbers, torque specs used, and working monitoring access in your own name. That file is what makes the next service call, insurance question or home sale straightforward instead of archaeological.

Also in Greenacres

Other solar work we do here

Repair & maintenanceDiagnostics, inverter faults, monitoring and post-storm checks.

Florida Service Areas

Panel Removal & Reinstallation near Greenacres

Crews based in Orlando and Tampa, covering 207 cities statewide.

We also cover Florida Panhandle, North Florida, Northeast Florida, Central Florida, Space Coast, Tampa Bay, Southwest Florida, Treasure Coast — see every Florida city we service.